Orlando

Rear Seat Replacement — 40 Percent Seat

1. Remove the rear seat riser finish covers.
2. Remove the rear seat bolts (1).



3. Unlatch the rear seat by pushing forward to release the lower rear seat latches (1).
4. Remove the seat (2) from the vehicle.

1. Install the rear seat (2) to the vehicle, locating the front seat riser pins into the floor.
2. Secure the rear of the seat by pushing down on the back of the seat ensuring that the seat latch (1) is securely latched.

Caution: Refer to Fastener Caution in the Preface section.




3. Install the 2 seat attachments bolts (1) to the front of the seat risers and tighten the bolts to 40 N·m (30 lb ft).
4. Install the rear seat riser finish covers.