To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Master Cylinder Reservoir Replacement


2501298

Callout

Component Name

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution in the Preface section.

Preliminary Procedures

  1. Remove and discard the brake fluid from the master cylinder reservoir.
  2. Remove dash upper extension panel opening cover. Refer to Dash Upper Extension Panel Opening Cover Replacement .

1

Brake Fluid Level Indicator Switch

Procedure

  1. Disconnect electrical connector.
  2. Twist level indicator clockwise and remove upwards.

2

Master Cylinder Reservoir Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

3

Master Cylinder Reservoir

Procedure

  1. If equipped, disconnect clutch master cylinder reservoir hose.
  2. Inspect the master cylinder for damage and replace, if necessary.
  3. Clean the reservoir with methylated spirit.
  4. Dry the reservoir with filtered, non-lubricated compressed air.

4

Master Cylinder Reservoir Seal (Qty: 2)

Procedure

Lubricate the seals and the reservoir bayonets with brake fluid. Refer to Adhesives, Fluids, Lubricants, and Sealers for the recommended brake fluid.

   


© Copyright Chevrolet. All rights reserved