To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Servo Unit Pump Replacement

Removal Procedure

    2506182
  1. Disconnect electrical connector (4).
  2. Disconnect the vacuum hose quick fitting (1) from power brake booster vacuum pump (2).
  3. Remove the bolts (3, 5).
  4. Remove the power brake booster vacuum pump (2) with bracket from the vehicle.

    5. 2192100
  5. Remove pump screws and nuts (1) from the power brake booster pump (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    2192100
  1. Install the pump screws and nuts (1) to the power brake booster pump (2) and tighten to 7.5 N·m (66 lb in).

    2. 2506182
  2. Disconnect electrical connector (4).
  3. Remove the power brake booster vacuum pump (2) with bracket from the vehicle.
  4. Install the bolts (3, 5) and tighten to 20 N·m (15 lb ft).
  5. Connect the vacuum hose quick fitting (1) to the power brake booster vacuum pump (2).
  6. Connect the electrical connector (4).
   


© Copyright Chevrolet. All rights reserved