Orlando

Handbrake Cable Replacement

Warning: Refer to Brake Dust Warning in the Preface section.

1. Remove the front floor rear console. Refer to Front Floor Rear Console Replacement .
2. Remove the rear seat. Refer to Rear Seat Replacement : 60 Percent Seat → 40 Percent Seat .
3. Remove the centre pillar lower garnish moulding. Refer to Centre Pillar Lower Garnish Moulding Replacement .



4. Partially remove the rear floor carpet (1).



5. Remove the parking brake cable (2) from the parking brake lever (1).
6. Remove the parking brake cable (2) from the parking brake cable bracket (3).



7. Remove the parking brake cable clip (1).
8. Remove the parking brake cable grommet (2).



9. Remove the parking brake cable casing retainer bolt (1).
10. Unclip the parking brake cable.



11. Remove the handbrake cable (1) from the rear brake caliper.

1. Install the parking brake cable (1) to the rear brake calliper.



2. Clip in the parking brake cable (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the parking brake cable casing retainer bolt (1). Tighten the bolt 10 N·m (89 lb in).



4. Install the parking brake cable grommet (2).
5. Install the parking brake cable clip (1).



6. Install the parking brake cable (2) to the parking brake cable bracket (3).
7. Install in the parking brake cable (2) to the parking brake lever (1).



8. Install the rear floor carpet (1).
9. Install the centre pillar lower garnish moulding. Refer to Centre Pillar Lower Garnish Moulding Replacement .
10. Install the rear seat. Refer to Rear Seat Replacement : 60 Percent Seat → 40 Percent Seat .
11. Install the front floor rear console. Refer to Front Floor Rear Console Replacement .