To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Turbocharger Heat Shield Replacement

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

  2. 2373120
  3. Remove 3 turbocharger heat shield retaining bolts (1).
  4. Remove the turbocharger heat shield (2).

Installation Procedure


    2373120
  1. Install the turbocharger heat shield (2).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 3 turbocharger heat shield retaining bolts (1), tighten to 10 N·m (89 lb in).
  4. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved