To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Replacement

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Install the engine lifter to the engine lift rear bracket.

  4. 2506243
  5. Remove the 5 engine mount bolts (2, 3) and the engine mount nut (1).
  6. Remove the engine mount (4).

Installation Procedure


    2506243
  1. Install the engine mount (4).
  2. Note: Do not tighten the bolts.

  3. Install the 3 engine mount to bracket bolts (3). DO NOT reuse the engine mount to bracket bolts (3) to install the mount (4). Use NEW bolts only.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 2 engine mount to body bolts (2) and the engine mount to body nut (1).
  6. • Tighten the 2 engine mount to body bolts (2) to 62 N·m (46 lb ft).
    • Tighten the engine mount to body nut (1) to 62 N·m (46 lb ft).
    • Tighten the 3 NEW engine mount to bracket bolts (3) to 50 N·m + 60° - 75° (37 lb ft + 60° - 75°).
  7. Remove the engine lifter from the rear engine lift bracket.
  8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  9. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved