To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Bracket Replacement

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  3. Install the engine lifter to the engine lift rear bracket.
  4. Remove the engine mount. Refer to Engine Mount Replacement .
  5. Remove the belt idler pulley - upper. Refer to Belt Idler Pulley Replacement - Upper .
  6. Remove the belt idler pulley - lower. Refer to Belt Idler Pulley Replacement - Lower .

  7. 2373201
  8. Remove the 3 engine mount bracket retaining bolts (2).
  9. Remove the engine mount bracket (1).

Installation Procedure


    2373201
  1. Install the engine mount bracket (1).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 3 engine mount bracket bolts (2) and tighten to 58 N·m (43 lb ft).
  4. Install the belt idler pulley - lower. Refer to Belt Idler Pulley Replacement - Lower .
  5. Install the belt idler pulley - upper. Refer to Belt Idler Pulley Replacement - Upper .
  6. Install the engine mount. Refer to Engine Mount Replacement .
  7. Remove the engine lifter from the rear engine lift bracket.
  8. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
  9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
   


© Copyright Chevrolet. All rights reserved