To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Lift Front Bracket Replacement

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

  2. 2373169
  3. Remove the engine lift front bracket bolt (2) from the cylinder head.
  4. Remove the engine lift front bracket (1).

Installation Procedure


    2373169
  1. Install the engine lift front bracket (1).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the bolt (2) to the cylinder head and tighten to 22 N·m (16 lb ft).
  4. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved