To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Lift Rear Bracket Replacement

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

  2. 2373170
  3. Remove the engine lift rear bracket bolt (2) from the cylinder head.
  4. Remove the engine lift rear bracket (1).

Installation Procedure


    2373170
  1. Install the engine lift rear bracket (1)
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the engine lift rear bracket bolt (2) to the cylinder head and tighten to 22 N·m (16 lb ft).
  4. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved