Preliminary Procedures

1. Remove the power steering pump belt. Refer to Power Steering Pump Belt Replacement .
2. Place drain pans under the vehicle as needed.

1

Power Steering Gear Inlet Hose Hollow Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Install 2 NEW copper rings.

Tighten
45 N·m (33 lb in)

2

Power Steering Gear Inlet Hose

3

Power Steering Reservoir Outlet Hose

4

Power Steering Pump Bolt (Qty: 3)

Tighten
22 N·m (16 lb ft)

5

Power Steering Pump

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

Tip
Clean any excess power steering fluid from the vehicle.