To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Gas Recirculation Manifold Cooling Return Hose Replacement — 2.0L Diesel LNP

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Remove the engine control module. Refer to Engine Control Module Replacement .
  3. Remove the battery tray. Refer to Battery Tray Replacement .
  4. Drain the engine cooling system. Refer to Cooling System Draining and Filling .
  5. If equipped, disconnect the automatic transmission hose from the radiator surge tank mount.
  6. Remove the radiator surge tank clip . Refer to Radiator Surge Tank Replacement . Hang the radiator surge tank aside.
  7. Remove the charge air cooler outlet hose. Refer to  Charge Air Cooler Outlet Hose Replacement : LNP and Manual Transmission → LNP and Automatic Transmission .

  8. 2373168
  9. Remove the 2 clamps (1).
  10. Remove the exhaust gas recirculation manifold cooling return hose (2).

Installation Procedure


    2373168
  1. Install the exhaust gas recirculation manifold cooling return hose (2).
  2. Install the 2 clamps (1).
  3. Install the charge air cooler outlet hose. Refer to  Charge Air Cooler Outlet Hose Replacement : LNP and Manual Transmission → LNP and Automatic Transmission .
  4. Clip the radiator surge tank into the mount. Refer to Radiator Surge Tank Replacement .
  5. If equipped, connect the automatic transmission hose clip to the radiator surge tank mount.
  6. Install the battery tray. Refer to Battery Tray Replacement .
  7. Install the engine control module. Refer to Engine Control Module Replacement .
  8. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
  9. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved