To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injection Pump Removal

Special Tools

EN-50434 Dust Cap - Fuel Rail Port

For equivalent regional tools, refer to Special Tools .


    2373141
  1. Remove the 2 fuel injection fuel feed pipe nuts from the fuel feed rail and the fuel injection pump.
  2. Remove the fuel feed pipe (1).
  3. Close all connections with the EN-50434 dust caps .

  4. 2373142
  5. Remove the 3 fuel injection pump retaining bolts (2).
  6. Note: Do not tilt the fuel injection pump actuator at inlet camshaft.

  7. Remove the fuel injection pump (1).
   


© Copyright Chevrolet. All rights reserved