To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Cover Installation

  1. Clean the sealing surfaces.

  2. 2373289

    Note: The complete installation procedure of the camshaft cover should be done in 10 minutes.

    Note: Do not coat sealing compound on the camshaft guide bolt holes and threads.

  3. Apply sealing compound on sealant lines (1).

  4. 2373148
  5. Install the camshaft cover (1) along with a NEW gasket (3).
  6. Caution: Refer to Fastener Caution in the Preface section.

  7. Install 20 camshaft cover retaining bolts (2) and tighten to 10 N·m (89 lb in).
   


© Copyright Chevrolet. All rights reserved