To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Gas Recirculation Vacuum Regulator Solenoid Valve Vacuum Hose Replacement

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement

  2. 2511753
  3. Remove the exhaust gas recirculation vacuum regulator solenoid valve vacuum hose (2) from the exhaust gas recirculation vacuum regulator solenoid valve (1).
  4. Remove the exhaust gas recirculation vacuum regulator solenoid valve vacuum hose (2) from the exhaust gas recirculation bypass valve (3).

Installation Procedure


    2511753
  1. Install the exhaust gas recirculation vacuum regulator solenoid valve vacuum hose (2) to the exhaust gas recirculation vacuum regulator solenoid valve (1).
  2. Install the exhaust gas recirculation vacuum regulator solenoid valve vacuum hose (2) to the exhaust gas recirculation bypass valve (3).
  3. Install the engine sight shield. Refer to Engine Sight Shield Replacement
   


© Copyright Chevrolet. All rights reserved