To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Pressure Differential Sensor Replacement

Removal Procedure

    2511754
  1. Disconnect the exhaust pressure differential sensor wiring harness plug (1).
  2. Loosen the 2 exhaust pressure differential sensor hose clips (4).
  3. Remove the 2 exhaust pressure differential sensor hoses (3) and the 2 exhaust pressure differential sensor hose clips.
  4. Remove the 2 exhaust pressure differential sensor bolts (2).
  5. Remove the exhaust pressure differential sensor (5).

Installation Procedure

    2511754
  1. Install the exhaust pressure differential sensor (5).
  2. Install the 2 exhaust pressure differential sensor bolts (2) and tighten to 9 N·m (80 lb ft).
  3. Install the 2 exhaust pressure differential sensor hoses (3) and the 2 exhaust pressure differential sensor hose clips.
  4. Fix the 2 exhaust pressure differential sensor hose clips (4).
  5. Connect the exhaust pressure differential sensor wiring harness plug (1).
   


© Copyright Chevrolet. All rights reserved