To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Glow Plug Controller Replacement

Removal Procedure


    2191705
  1. Disconnect the 2 wiring harness plugs (3).
  2. Remove the glow plug control module (1) by loosening the 2 retainer clips (2).

Installation Procedure


    2191705
  1. Install the glow plug control module (1). Slide the glow plug control module (1) on to the 2 retainer clips (2) until they engage audibly.
  2. Connect the 2 wiring harness plugs (3).
   


© Copyright Chevrolet. All rights reserved