To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Inlet Air Duct Replacement

Removal Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .

  2. 2511756
  3. Separate the front inlet air duct (2) from the rear inlet air duct (1).
  4. Push the rear inlet air duct carefully out of the 2 lower bracket insulators.

  5. 2511757
  6. Remove the rear inlet air duct (2) from the air filter adaptor (1) and from the brackets.
  7. Remove the 3 rear inlet air duct bracket insulators (3) from the rear inlet air duct (2).

  8. 2191987
  9. Install the 3 bracket insulators (1) in to the guide.

Installation Procedure


    2511757

    Note: Ensure that the rear inlet duct is correctly engaged into the bracket insulator (3).

  1. Install the rear inlet air duct (2) to the air filter adaptor (1) and to the brackets.

  2. 2511756
  3. Push the rear inlet air duct (1) carefully into the 2 lower bracket insulators and to the front inlet air duct (2).
  4. Install the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
   


© Copyright Chevrolet. All rights reserved