To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Level Indicator Switch Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  3. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .

  4. 2506195
  5. Disconnect the engine oil level indicator switch wiring harness plug (1) from the engine oil level indicator switch (2).
  6. Remove the engine oil level indicator switch (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    2506195
  1. Install the engine oil level indicator switch (2). Tighten the oil level indicator switch to 20 N·m (15 lb ft).
  2. Connect the engine oil level indicator switch wiring harness plug (1) to the engine oil level indicator (2).
  3. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  4. Lower the vehicle.
  5. Fill the engine with engine oil. Refer to Engine Mechanical Specifications .
   


© Copyright Chevrolet. All rights reserved