To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Feed Pipe Replacement — Fuel Filter to Fuel Feed Pipe

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Place a collecting basin underneath.
  4. Warning: Refer to Petrol/Petrol Vapours Warning in the Preface section.


    2511793
  5. Disconnect the fuel feed pipe (3) from the fuel filter (1). Refer to Plastic Collar Quick Connect Fitting Service .
  6. Disconnect the fuel feed pipe (3) from the fuel feed pipe (2). Refer to Plastic Collar Quick Connect Fitting Service .

Installation Procedure


    2511793
  1. Connect the fuel feed pipe (3) to the fuel feed pipe (2). Refer to Plastic Collar Quick Connect Fitting Service .
  2. Connect the fuel feed pipe (3) to the fuel filter (1). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Lower the vehicle.
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
   


© Copyright Chevrolet. All rights reserved