To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Timing Chain Tensioner Replacement

Special Tools

EN-49073 Pin - Timing Chain Tensioner

For equivalent regional tools, refer to Special Tools .

Removal Procedure

  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .

  2. 2373390
  3. Apply tension to the timing chain tensioner (1). Fix the tensioner with the EN-49073 pin .
  4. Remove the 2 timing chain tensioner retaining bolts (2).
  5. Remove the timing chain tensioner (1).

Installation Procedure


    2373390
  1. Apply tension to the timing chain tensioner and fix with the EN-49073 pin .
  2. Install the timing chain tensioner (1).
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install 2 timing chain tensioner retaining bolts (2). Tighten the retaining bolts (2) to 10 N·m (89 lb in).
  5. Remove the EN-49073 pin .
  6. Install the engine front cover. Refer to Engine Front Cover Replacement .
   


© Copyright Chevrolet. All rights reserved