To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft and Bearing Installation


    2373379

    Note: If the old crankshaft bearing shells was reused, set it in as removed. The middle crankshaft bearing (3) contains the thrust bearing.

  1. Coat the crankshaft bearing shells with engine oil.
  2. Install the 5 upper crankshaft bearings .
  3. Note: Take extreme care to prevent any scratches or damage to the crankshaft.

  4. Install the crankshaft (1).
  5. Install the 5 lower crankshaft bearings (2).
   


© Copyright Chevrolet. All rights reserved