To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Lower Oil Sump Installation

  1. Remove any old thread sealant and gasket material with a suitable tool.
  2. Clean the lower oil pan and lower oil pan components with solvent.
  3. Note: Ensure that the sealing surface is clear of oil, grease and old sealant material.

  4. Clean out debris from the bolt holes.
  5. Warning: Refer to Safety Glasses and Compressed Air Warning in the Preface section.

  6. Dry the lower oil pan and lower oil pan components with compressed air.

  7. 2373286

    Note: The complete installation procedure of the lower sump should be done in 10 minutes.

    Note: Do not coat sealing compound on the sump bolt holes and threads.

  8. Apply sealing compound on sealant line (1).

  9. 2373144
  10. Install the lower oil sump (1).
  11. Caution: Refer to Fastener Caution in the Preface section.

  12. Install the 14 lower sump retaining bolts (2) and tighten evenly to 10 N·m (89 lb in).
   


© Copyright Chevrolet. All rights reserved