To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Front Mount Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the front of the transmission using a suitable jack stand.

    3. 2027411
  3. Remove the transmission front mount through bolt (1).

    4. 2027412
  4. Remove the transmission front mount bolts (1).
  5. Remove the transmission front mount (1).

Installation Procedure

    2027412
  1. Install the transmission front mount (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the transmission front mount bolts (1) and tighten to 62 N·m (46 lb ft).

    3. 2027411
  3. Install the transmission front mount through bolt (1) and tighten to 100 N·m (74 lb ft).
  4. Remove the jack stand.
  5. Lower the vehicle.
   


© Copyright Chevrolet. All rights reserved