To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Thermostat Bypass Pipe Installation


    2373158
  1. Install the thermostat bypass pipe (4).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the thermostat bypass pipe retaining bolts (2) and tighten to 10 N·m (89 lb in).
  4. Install the 2 thermostat bypass pipe retaining bolts (3) and tighten to 25 N·m (18 lb ft).
  5. Install the 4 clamps (1, 5).
   


© Copyright Chevrolet. All rights reserved