Orlando

Crankshaft Pulley Installation

Special Tools

EN-50432 Adaptor Flywheel Fixing

For equivalent regional tools, refer to Special Tools .

1. Install the crankshaft pulley (1).
2. Loosely install a NEW crankshaft pulley bolt (3) and the washer (2).



3. Install the EN-50432 flywheel fixing (1).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

4. Tighten the crankshaft pulley bolt to 120 N·m + 90° (89 lb ft + 90°).