To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Temperature Sensor Installation - Position 1

Special Tools

EN-50429 Adaptor Exhaust Temperature Sensor Remover/Installer

For equivalent regional tools, refer to Special Tools .

    Caution: Refer to Fastener Caution in the Preface section.


    2373392
  1. Install the exhaust temperature sensor position 1 (2) to the turbocharger (1), using the EN-50429 adaptor (1).
  2. Tighten the exhaust temperature sensor position 1 (2) to 45 N·m (33 lb ft).
   


© Copyright Chevrolet. All rights reserved