To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Throttle Body Heater Outlet Hose Replacement — 1.8L 2H0

Removal Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .

  2. 2512567
  3. Loosen the clamp (2) and disconnect the throttle body heater outlet hose (3) from the radiator surge tank (1).
  4. Disconnect the throttle body heater outlet hose connector from the throttle body (4). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Remove the throttle body heater outlet hose (3).

Installation Procedure


    2512567
  1. Install the throttle body heater outlet hose (3).
  2. Connect the throttle body heater outlet hose connector to the throttle body (4). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Connect the throttle body heater outlet hose (3) to the radiator surge tank (1) and install the clamp (2).
  4. Fill the cooling system. Refer to Cooling System Draining and Filling .
   


© Copyright Chevrolet. All rights reserved