To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Gas Recirculation Valve Cooling Feed Hose Replacement

Removal Procedure
  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Drain the engine cooling system. Refer to Cooling System Draining and Filling .

    3. 2373161
  3. Remove the 2 clamps (3).
  4. Remove the exhaust gas recirculation valve cooling feed hose (4).

Installation Procedure

    2373161
  1. Install the exhaust gas recirculation valve feed hose (4).
  2. Install the 2 clamps (3).
  3. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
  4. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
   


© Copyright Chevrolet. All rights reserved