Orlando

Air Conditioning Condenser Replacement — 2.4L LAF

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
3. Remove front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
4. Remove the air conditioning refrigerant pressure sensor. Refer to Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement .
5. Remove intake air duct. Refer to Intake Air Duct Replacement .



6. Remove the 4 radiator air side upper baffle bolts (2).
7. Remove the radiator air side upper baffle (1).



8. Remove the air conditioning compressor and condenser hose nut and loosen the air conditioning compressor and condenser hose (1).
9. Remove the air conditioning evaporator hose nut and loosen the air conditioning evaporator hose (2).



10. Remove the air conditioning condenser (1).

1. Install the air conditioning condenser (1).



2. Install the air conditioning compressor and condenser hose (1).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the air conditioning compressor and condenser hose nut and tighten to 22 N·m (16 lb ft).
4. Install the air conditioning evaporator hose (2).
5. Install the air conditioning evaporator hose nut and tighten to 22 N·m (16 lb ft).



6. Install the radiator air side upper baffle (1).
7. Install the 4 radiator air side upper baffle bolts (2) and tighten to 4 N·m (35 lb ft).
8. Install intake air duct. Refer to Intake Air Duct Replacement .
9. Install the air conditioning refrigerant pressure sensor. Refer to Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement .
10. Install front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
11. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
12. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .