To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Object Alarm Module Scan Tool Information

Object Alarm Module Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON/Engine OFF/Parking Assist ON

Battery Voltage

--

11-14 V

The scan tool displays V. This is the current battery voltage.

Calculated Gearbox Range

Gearbox in reverse

Reverse

The scan tool displays Park, Reverse, Neutral, Drive or Unknown depending on the state of the commanded gear.

Park Assist Chime

--

Varies

The scan tool displays On or Off. On is displayed if there is an object within the measuring range of the object sensors.

Park Assist Disable History 1

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 2

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 3

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 4

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 5

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 6

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Disable History 7

--

Varies

The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.

Park Assist Sensor

--

On

The scan tool displays On or Off.

Park Assist Sensor Reference Voltage

--

7.3-9.1 V

The scan tool displays V. This is the amount of voltage being sent to the object sensors.

Park Assist System Status

--

Enable

The scan tool displays Disable, Enable, Inhibited or Failed. This is the state of the parking assist system.

Parking Assist Attached Object Status

--

No

The scan tool displays Yes or No. Yes is displayed if there is an object within the measuring range of the object sensors.

Power Mode

--

Run

The scan tool displays Off, Accessory, Run or Crank. This is the state of the ignition switch.

   


© Copyright Chevrolet. All rights reserved