Orlando

Water Pump Cover Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement .
3. Remove front compartment shield. Refer to Front Compartment Splash Shield Replacement .



4. Remove the 4 water pump cover bolts (1) and the water pump cover (2) along with the gasket (3).

Caution: Refer to Fastener Caution in the Preface section.





Note: Use a NEW water pump cover gasket (3)

1. Install the water pump cover (2) and the 4 water pump bolts (1) and tighten to 10 N·m (89 lb in).
2. Install the engine front compartment shield. Refer to Front Compartment Splash Shield Replacement .
3. Install the front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement .
4. Lower the vehicle.