To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Cylinder Head Opening Plate Replacement

Removal Procedure

    2577137
  1. Remove the cylinder head opening plate bolts (3).
  2. Remove the cylinder head opening plate (2) along with the cylinder head opening plate gasket (1).

Installation Procedure

    2577137
  1. Install the cylinder head opening plate (2) with the NEW cylinder head opening plate gasket (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the cylinder head opening plate bolts (3) and tighten to10 N·m (89 lb in).
   


© Copyright Chevrolet. All rights reserved