To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Flexible Fuel Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. 2594923
  2. Remove the fuel feed pipe (1, 2) from the flexible fuel sensor (4). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Disconnect the flexible fuel sensor wiring harness plug (3).
  4. Unclip the flexible fuel sensor (4).

Installation Procedure

    2594923
  1. Clip in the flexible fuel sensor (4).
  2. Connect the flexible fuel sensor wiring harness plug (3).
  3. Install the fuel feed pipe (1, 2) to the flexible fuel sensor (4). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Lower the vehicle.
   


© Copyright Chevrolet. All rights reserved