Orlando

Water Pump Replacement — 2.4L LAF

Special Tools

EN-44602 Water Pump Holding Tool

For equivalent regional tools, refer to Special Tools .

1. Remove the three way catalytic converter. Refer to Three-Way Catalytic Converter Replacement .
2. Remove the radiator outlet pipe. Refer to Radiator Outlet Pipe Replacement .
3. Remove the water pump cover. Refer to Water Pump Cover Replacement .



4. Install the EN-44602 holding tool (1) to the water pump sprocket.



5. Remove the 3 water pump sprocket bolts (2) from the water pump sprocket through the EN-44602 holding tool (1).




Note: Do not remove the bolts out of the front cover holes.

6. Loosen completely the 2 water pump bolts (1) from the engine front cover.



7. Remove the 2 water pump bolts (1) and remove the water pump (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the water pump (2) and install the 2 water pump bolts (1) and tighten to 23 N·m (17 lb ft).



2. Install the 2 water pump bolts (1) to the engine front cover and tighten to 23 N·m (17 lb ft).



3. Install the 3 water pump sprocket bolts (2) through the EN-44602 holding tool (1) and tighten the bolts to 8 N·m (71 lb in).



4. Remove the EN-44602 holding tool (1) from the water pump sprocket.
5. Install the water pump cover. Refer to Water Pump Cover Replacement .
6. Install the radiator outlet pipe. Refer to Radiator Outlet Pipe Replacement .
7. Install the three way catalytic converter. Refer to Three-Way Catalytic Converter Replacement .