Orlando

Radiator Surge Tank Inlet Hose/Pipe Replacement

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .



2. Unclip the clip (4) from the fuel pump cover.
3. Remove the radiator surge tank inlet hose/pipe bolt (1).
4. Remove the 2 clamps (3) and remove the radiator surge tank inlet hose/pipe (2).

1. Install the radiator surge tank inlet hose/pipe (2) and the 2 clamps (3)

Caution: Refer to Fastener Caution in the Preface section.

2. Install the radiator surge tank inlet hose/pipe bolt (1) and tighten to 10 N·m (89 lb in).
3. Clip in the clip (4) to the fuel pump cover.
4. Install the inlet manifold cover. Refer to Intake Manifold Cover Replacement .