Orlando

Generator Replacement — 2.4L LAF

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove the drive belt. Refer to Drive Belt Replacement .



4. Fold the alternator cap (2) aside.
5. Remove the generator positive cable retaining nut (3) and the generator positive cable (4).
6. Lower the vehicle.
7. Remove the air cleaner outlet rear duct. Refer to Air Cleaner Outlet Rear Duct Replacement .
8. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
9. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
10. Remove the engine lift front bracket . Refer to Engine Lift Front Bracket Replacement .
11. Disconnect the generator wiring harness plug (1) from the generator .



12. Remove the 3 generator bolts (1).
13. Remove the alternator (2).

1. Install the alternator (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 3 generator bolts (1) and tighten to 22 N·m (16 lb ft).



3. Connect the alternator wiring harness plug (1) to the alternator.
4. Install the engine lift front bracket . Refer to Engine Lift Front Bracket Replacement .
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
7. Install the air cleaner outlet rear duct. Refer to Air Cleaner Outlet Rear Duct Replacement .
8. Raise the vehicle.
9. Install the generator positive cable (4) and the generator positive cable retaining nut (3) and tighten to 17 N·m (13 lb ft).
10. Fold the alternator cap (2) to the alternator positive cable terminal.
11. Install the drive belt. Refer to Drive Belt Replacement .
12. Lower the vehicle.
13. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .