To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Tank Pressure Sensor Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
  2. Remove the fuel tank. Refer to Fuel Tank Replacement .

    3. 2595045
  3. Disconnect the fuel tank pressure sensor wiring harness plug (2).
  4. Unclip the fuel tank pressure sensor (3) from the fuel tank pump module clip (1).

Installation Procedure

    2595045
  1. Clip the fuel tank pressure sensor (3) to the fuel tank pump module clip (1).
  2. Connect the fuel tank pressure sensor wiring harness plug (2).
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
   


© Copyright Chevrolet. All rights reserved