Preliminary Procedures

Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

1

Camshaft Position Actuator Solenoid Valve Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Exhaust Camshaft Position Actuator Solenoid Valve (Qty: 2)

Procedure

1. Disconnect the camshaft position actuator solenoid valve.
2. Clean the cylinder head mating surfaces before assembly.
3. Lubricate the camshaft position actuator solenoid valve seal ring with NEW engine oil.
4. Replace only the intake or exhaust camshaft position actuator solenoid valve as necessary.