To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Symptoms - Object Detection

Note: The following steps must be completed before using the symptom tables:

  1. Perform the Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:
    2. • There are no DTCs set.
    • The control modules can communicate via the serial data link.
  2. Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation .

Visual/Physical Inspection
    • Inspect for aftermarket devices which may affect the operation of the system. Refer to Checking Aftermarket Accessories .
    • Inspect the easily accessible or visible system components for obvious damage or conditions which may cause the symptom.
    • Make sure the rear parking assist sensors located on the vehicle rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

Symptom List

Parking Assist System Malfunction

   


© Copyright Chevrolet. All rights reserved