Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
2. Remove the front fog lamp. Refer to Front Fog Lamp Replacement .

1

Front Fog Lamp Bezel Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (23 lb in)

2

Front Fog Lamp Bezel

Procedure

1. Disengage the four inner retainer tabs securing the bezel to the front bumper fascia.
2. Pull outward from the outer edge in order to release the outer retention clips securing the bezel to the front bumper fascia.
3. Remove the front fog lamp bezel.