1

Rear Side Door Inside Handle Bolt Finish Cap

Procedure

Pull handle back to remove cap. Use suitable tool to unsnap.

2

Rear Side Door Inside Handle Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (23 lb in)

3

Rear Side Door Pull Handle Screw

Tighten
2.5 N·m (23 lb in)

4

Rear Side Door Trim Clip (Qty: 5)

Special Tools

BO-38778 Door Trim Panel Clip Remover

For equivalent regional tools, refer to Special Tools

5

Rear Side Door Trim Assembly

Procedure

1. Pull upwards on the door lock retainer cable to disengage.
2. Disconnect the electrical connectors.

Tip:
Only use BO-38778 remover to disengage the door trim clips from the door. Do not disengage the clips by pulling from the map pocket area, since this can distort the trim panel.