Cruze

Transmission Fluid Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the fluid level drain plug (1).
3. Drain transmission fluid into a suitable container.

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

4. Install the fluid level hole plug (1) and tighten to 12 N·m(106 lb in).

1. Lower the vehicle.
2. Remove the battery tray. Refer to Battery Tray Replacement .
3. Remove the transmission vent hose (2).
4. Remove the fluid filler cap (1).
5. Fill the transmission to the proper level with the correct fluid. Refer to Transmission Fluid Level and Condition Check andFluid Capacity Specifications : 6T30 → 6T40/45/50 .
6. Install the fluid filler cap (1).
7. Install the transmission vent hose (2).
8. Install the battery tray. Refer to Battery Tray Replacement .