Cruze

Brake Shoe Inspection

Special Tools

CH 230 Disc Gauge

For equivalent regional tools, refer to Special Tools .

Warning: Refer to Brake Dust Warning in the Preface section.




1. Measure the brake shoe lining thickness, using the CH 230 gauge (1).
2. Compare the brake shoe lining thickness recorded to the brake drum component specification. Refer to Drum Brake Component Specifications .

Note: Replace the shoe and lining assembly in axle sets only.

3. If the brake shoe lining thickness is less than the specification, or if a defect is found, replace the linings. Refer to Brake Shoe Replacement .