To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injector Installation

Caution: 

   • Use care when servicing the fuel system components, especially the fuel injector electrical connectors, the fuel injector tips, and the injector O-rings. Plug the inlet and the outlet ports of the fuel rail in order to prevent contamination.
   • Do not use compressed air to clean the fuel rail assembly as this may damage the fuel rail components.
   • Do not immerse the fuel rail assembly in a solvent bath in order to prevent damage to the fuel rail assembly.


    2027848
  1. Install 4 NEW fuel injector gaskets (2).
  2. Install the 4 injectors (1).

    3. 2027840
  3. Shift the fuel injector bracket (2) and the bolt (1) with the washer (3) forward.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Tighten the fuel injector bracket bolt to 28 N·m (21 lb ft).

    5. 2027830

    Note: Inspect the gaskets before installation, replace if damaged.

  5. Install the hole plugs and the hole plug gaskets (2, 3).
  6. Install the hole plug bolts (1) and tighten to 7 N·m (62 lb in).
   


© Copyright Chevrolet. All rights reserved