Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tyre and wheel. Refer to Tyre and Wheel Removal and Installation .
3. Remove the lower control arm. Refer to Lower Control Arm Replacement .

1

Lower Control Arm Rear Bushing Bolt

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

Procedure

1. Install NEW Bushing Bolt, do NOT reuse old bolt.
2. Tighten Bushing Bolt with vehicle standing on the ground.

Tighten
55 N·m (41 lb ft) +45-60 °

Special Tools

EN-45059 Angle Meter .

Refer to Special Tools .

2

Lower Control Arm Rear Bushing