To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Oil Pump Drive Shaft Seal Installation

Special Tools

EN-48250 Installer-Crankshaft Front Oil Seal

For equivalent regional tools, refer to Special Tools .

  1. Install a NEW oil pump drive shaft seal.

    2. 2027184
  2. Use the EN-48250 installer (1) to install the oil pump drive shaft seal (2).

    3. 2027183

    Note:  While installing the oil pump drive shaft seal (1) to the oil pump housing (2) it is importantly that the oil pump drive shaft seal concisely at the cylinder head fits.

  3. Install the oil pump drive shaft seal (1).
   


© Copyright Chevrolet. All rights reserved