Cruze

Inlet Manifold Assemble

1. Install the inlet air pressure and temperature sensor gasket (4).
2. Install the inlet air pressure and temperature sensor (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the inlet air pressure and temperature sensor bolt (3) and tighten to 8 N·m (71 lb in).
4. Install the coolant temperature sensor (1) and tighten to 35 N·m (26 lb ft).



5. Install the thermostat (2) to the inlet manifold (1).
6. Install the thermostat housing gasket (5).
7. Install the thermostat housing (3).
8. Install the 2 thermostat housing bolts (4) and tighten to 23 N·m (17 lb ft).