Cruze

Timing Belt Idler Pulley Replacement

1. Remove the timing belt. Refer to Timing Belt Replacement : 1.6L LDE, LXV, 1.8L 2H0, and LUW .



2. Remove and DISCARD the timing belt idler pulley bolt (1).
3. Remove the timing belt idler pulley (2).

1. Clean the timing belt idler pulley thread.

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

Note: Use an assembly tool.

2. Install the timing belt idler pulley (2) and the NEW bolt (1) with screw locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
3. Tighten the NEW bolt (1) to 25 N·m (18 lb ft).
4. Install the timing belt. Refer to Timing Belt Replacement : 1.6L LDE, LXV, 1.8L 2H0, and LUW .