Preliminary Procedures

Remove the front side door upper trim cover. Refer to Front Side Door Upper Trim Cover Replacement .

1

Front Side Door Pull Handle Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Side Door Inside Handle Bolt Finish Cap

Procedure

Pull handle back to remove cap. Use suitable tool to unsnap.

3

Front Side Door Inside Handle Bolt

Tighten
2.5 N·m (22 lb in)

4

Front Side Door Trim Clip (Qty: 10)

Special Tools

BO-38778 Door Trim Panel Clip Remover

For equivalent regional tools, refer to Special Tools .

5

Front Side Door Trim

Procedure

1. Pull upwards on the door lock retainer cable to disengage.
2. Disconnect the electrical connectors.

Tip:
Only use BO-38778 remover to disengage the door trim clips from the door. Do not disengage the clips by pulling from the map pocket area, since this can distort the trim panel.