Cruze

Oil Level Indicator Tube Replacement - 1.6L LDE, LXV, 1.8L 2H0, and LUW

1. Open the bonnet.
2. Remove the oil dipstick.

Note: If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube.

3. Place collecting basin underneath.



4. Remove the oil level indicator tube bolt (1).
5. Remove the oil level indicator tube (2) and the oil level indicator seal.

1. Install the oil level indicator tube (2).
2. Install a NEW oil level indicator tube gasket.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the oil level indicator tube bolt (1) and tighten to 8 N·m (71 lb in).
4. Install the oil dipstick.
5. Close the bonnet.